Video Accessories
The function of the CCTV Balun is to allow the traditional 75-ohm coaxial video cable to be replaced by Category 5E/6 (or better) twisted pair in the CCTV security and surveillance environment, thereby allowing CCTV camera and monitoring equipment tobe deployed more cost-effectively using structured cabling techniques.
The CCTV Balun finds applications in the following areas:
-
Industrial and Corporate Security
-
Banks and Schools
-
Prison and Correctional Institutions
-
CCTV Security Systems
-
Traffic Monitoring Systems
-
Government and Educational Institution CCTV Monitoring
-
Commercial and Retail
-
Casinos
-
Parking lots

TS-920HD-II
1-CH Mini Passive Video Balun
Push pin terminal connection;too-less installation in less than 1 minute
•Dimensions: 185*18.5*19mm (L*W*H BNC connector+ pigtail included)
**Supports AHD, Cvi, Tvi, 960H
•Color video max up to 1443ft(440m) for 720P HD-CVI analog camera,787ft(240m) for 1080P over UTP cat5e/6
•Color video max up to 754ft(230m) for 720P HD-TVI analog camera,820ft(250m) for 1080P over UTP cat5e/6
•Color video max up to 1050ft(320m) for 720P HD-AHD analog camera,1082ft(330m) for 960P over UTP cat5e/6
•Built-in TVS for surge protection
•Lightning protection design Grade: Ⅲ
•Wave Filter Design, Anti-Static Design
•60 dB crosstalk and noise immunity
•ABS Engineering plastic housing

TS-HDP4201P
Video Converter Power and Video over Cat6 to AHD,CVi,TVi, CVBS
•Color video max up to 1443ft(440m) for 720P HD-CVI analog camera,787ft(240m) for 1080P over UTP cat5e/6
•Color video max up to 754ft(230m) for 720P HD-TVI analog camera,820ft(250m) for 1080P over UTP cat5e/6
•Color video max up to 1050ft(320m) for 720P HD-AHD analog camera,1082ft(330m) for 960P over UTP cat5e/6
•Built-in TVS for surge protection
•Lightning protection design Grade: Ⅲ
•Wave Filter Design, Anti-Static Design
•60 dB crosstalk and noise immunity
•ABS Engineering plastic housing

TS-331PV-HD
1-ch HD video & power transmitter at camera side
1-ch HD video & power receiver at DVR side
RJ45 Jack for UTP cat5e/6 cable
12V/24V DC/AC are both workable
Please refer to power distance chart of the manual for details
Dimensions: 210*29*20mm (L*W*H BNC connector+ pigtail included)
•Color video max up to 1443ft(440m) for 720P HD-CVI analog camera,787ft(240m) for 1080P over UTP cat5e/6
•Color video max up to 754ft(230m) for 720P HD-TVI analog camera,820ft(250m) for 1080P over UTP cat5e/6
•Color video max up to 1050ft(320m) for 720P HD-AHD analog camera,1082ft(330m) for 960P over UTP cat5e/6
•Built-in TVS for surge protection
•Lightning protection design Grade: Ⅲ
•Wave Filter Design, Anti-Static Design
•60 dB crosstalk and noise immunity
•ABS Engineering plastic housing

TS-HD4301VP
1-ch HD video & power transmitter at camera side
1-ch HD video & power receiver at DVR side
•RJ45 Jack for UTP cat5e/6 cable
•12V/24V DC/AC are both workable
•Please refer to power distance chart of the manual for details
•Connectable case for neat installation
•Dimensions: 210*29*20mm (L*W*H BNC connector+ pigtail included)
•Color video max up to 400m (1312ft) for CVBS camera
•Color video max up to 320m (1049ft) for HD-AHD 720P camera Color video max up to 320m (1049ft) for HD-AHD 960P camera Color video max up to 250m (984ft) for HD-AHD 1080P camera Color video max up to 180m (590ft) for HD-AHD 3MPX camera
Color video max up to 200m (656ft ) for HD-AHD 4MPX camera
Color video max up to 200m (656ft ) for HD-AHD 5MPX camera

TS-102POED
POE Converter for non POE IPC CCTV cameras
● IEEE 802.3af PoE Standard Compliant
● 10/100M auto-negotiation and auto-MDIX fast Ethernet RJ45 Port
● Maximum 15.4 watts power for each POE port
● 12V 1A DC Output Optional
Converts a non POE camera into POE

TS-600
Ground Loop Isolator
BNC male to BNC female with mini cable 25 on both sides;
Passive, no power required;
Prevents video-signal distortion caused by video ground loops;
Eliminates picture tearing, cross talk and rolling;
Prevents power cables laid by others interfering with the CCTV system;
Built in TVS ( Transient Voltage Suppressors) for surge protection.

1-CH Ethernet and power over coaxial cable Transmitter with power
Coaxial cable transmit Ethernet signal, maximum distance ay less than 1ms; Opup to 2km; Network deltional transmission medium, coaxial cable or UTP cable; Meet single mode, link mode and star mode network at the same time; Loop circuit mode, if there is one breakdown in the circuit, the system still can work normally; Meet Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX; Protection and anti-interference: Excellent circut isolation protection, effectively improve Product's lightning pro

TS-2204E
4 Port Ethernet Extender Signal Transmitter, using coaxial cable transmit Ethernet signal, maximum distance up to 2km;
140*95*30mm,220g/pc
Use coaxial cable transmit Ethernet signal, maximum distance up to 2km;
Network delay less than 1ms;
Optional transmission medium, coaxial cable or UTP cable;
Meet single mode, link mode and star mode network at the same time;
Loop circuit mode, if there is one breakdown in the circuit, the system still can work normally;
Meet Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX;
Protection and anti-interference: Excellent circut isolation protection, effectively improve
Product's lightning protection, ESD and anti-interference ability;

TS-401BE
4 port Ethernet Extender Receiver
Use coaxial cable transmit Ethernet signal, maximum distance up to 2km;
Network delay less than 1ms;
Optional transmission medium, coaxial cable or UTP cable;
Meet single mode, link mode and star mode network at the same time;
Loop circuit mode, if there is one breakdown in the circuit, the system still can work normally;
Meet Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX;
Protection and anti-interference: Excellent circut isolation protection, effectively improve
Product's lightning protection, ESD and anti-interference ability;